REC600 AUTOMATIC JOLTING TABLE, PRO
According to the RILEM - CEM method, cement, mortar and other binders,
It is set to 60 strokes per minute with a spinning speed that makes one revolution in the middle for compression, making 60 strokes and automatically stopping.
These strokes are measured on a scale of 28x30 cm on the device to 15 mm suddenly falls and falls.
The weight of the shock table on the device; three-hole steel mold filling on together with funnel, total 20 kg and tolerance of + - 500 gr.
The device complies with EN 196 - 1 standards.
The device is electronically programmable digital counter.
Isolation cabinet and lower concrete formwork system.
Dimension : 1400 * 700 * 450 mm
Power Supply : 220 V / 50-60 Hz / 1 Phase
REC610 SOUNDPROOF IZOLATION CABINET FOR REC600
Special MDF is produced from wood material and inner surfaces are covered with complex special sound insulation material. It is carried on the isolation cabinet with digital control panel and is suitable for CE security systems as well as ease of use.
The cover opening hinge is hinged and it is designed to be very ergonomic to use thanks to the handles.
REC605 CONCRETE BLOCK BOTTOM FOR REC600
It is made from strength steel material.
The inside is reinforced with reinforced steels.
Possible livelihood after this concrete concrete throwing the lower mold is prevented from expanding outward.
Electrostatic oven painted and resistant to corrosion.
For the casting of two different concrete, the feet of the shock device were made by putting steel dowels in the future places. Thus, the problem of centering the device is avoided.
A special rubber sheet with a thickness of 10 mm should be placed on the lowest base of the concrete pavement.
Dimension : 1400 * 700 * 1300 mm
REC607 ELASTIC RUBBER BOTTOM PAD FOR REC600
10 mm thickness rubber base plate