5" TFT TOUCH SCREEN CONTROLLER
Rantek Curing/Humidity Cabinets are designed to stimulate real climate conditions by controlling temperature, humidity, day and night light cycles.
The temperature and humidity control range of the test cabinets allows many tests to be performed in different sectors.
However, stability, artificial aging, storage and shelf life tests can also be done easily. Designed for use in many industries.
In order to ensure maximum durability and reliability, the most appropriate materials for internal and external construction are used.
The cell is made of Stainless Steel and the outer body is made of epoxy-painted galvanized steel to be unaffected by high humidity.
The power lamps inside the door, protected by heat and refractory glass.
When cold and hot test temperatures are considered, insulation is of great importance for product efficiency.
The isolation of the Test Cabinet devices is achieved by injection of high density polyurethane.
Humidity is provided by a humidity generator and is measured by the humidity sensor inside the cell.
At this point, it is ensured that the nudge is measured in the most sensitive way.
The temperature is controlled by PID, humidification and cooling proportional control system.
In addition to the diagnostic system, there is an adjustable safety thermostat for heating.
There is a 5" touch screen on the user panel of the device.
Strong air circulation provides stability with very good temperature and humidity distribution even at low temperatures.
After the door is opened and closed, there is a rapid recovery period.
Test Cabinets are equipped with an advanced microprocessor control system.
Microprocessor controls maintain temperature and humidity in approximate ranges of +5°C to 60°C and 20%-95%, respectively.
A low-pressure water vapor generator controls chamber humidification by injecting saturated water vapor into the recirculating air duct.
This process is preferable to steam generation because steam introduces additional heat to the chamber atmosphere, which compromises temperature control.
Fully Automatic Water using
Stainless Steel inner side
Heat Paint external side
Stainless Steel Shelving : 3 Racks
Relative Humidity Range : 20% to 95%
Jacket Type : Air
Temperature Sensivity : ± 1 ºC
Temperature Range : +5°C to 60°C
Capacity : 1000 Lt.
Temperature Sensor : PT 100
Humidity Sensivity : ±1
Timer : 1 min. - 99.9 hour
RS 232 PC controlled system
220 V / 50 Hz / 1ph