360 PRISM MOULD | 10 STEEL BEAM MOULD
HIGH TECHNOLOGY 22.5 INCH TFT ALL IN ONE PC ONLINE DATA CONTROL
FULLY STAINLESS STEEL MADE

Moisture cabinet with pool system; is a device that meets both the Prism holding pools and the Moisture cabinet. 
Installation of air conditioners in the rooms, installation of temperature sensors in the pools, addition of resistances to heat the pool water, and the homogeneous distribution of the room air together with the pool water bring with it a lot of problems. 
The Moisture Cabinet with a pool system records all the 
information from the sensors as a graphical image on the computer by performing all these operations electronically and automatically in volume as a single device. 
The unit has 360 prisms and 10 beam molds. 
The device has a single door has a glass window. 
The appliance cabinet and its components are made entirely of stainless steel. 
There are 6mm spaced slots to accommodate the prism in the drawers. 
In this case, it is ensured that the prisms mentioned in the standard are closer than 5mm. 
To place the prism There are 3 drawers inside the device.  
In this case, it is ensured that the prisms mentioned in the standard are closer than 5mm. 
Each drawer is independent of each other to set the specimens in the separate feature. 
There is a rested water tank inside the device. 
The unit has both a heating and a cooling system, which is controlled by the electronic TFT Touch Screen PC Control Unit and the temperature inside the cabinet is kept at 20 ± 1 degrees. 
There is a sprinkling system inside the unit and humidity is at least 93% inside. 
The temperature sensor in the sprinkler system storage is available and temperature information is sent to the computer by following the electronic display. 
The water returning from the sprinkler system is sent for reuse. 
There is a sensor on the device that measures the humidity and temperature of the room in which the device is located, and an electronic display that direct reads by TFT Computer. 
There is a sensor inside the device that measures the humidity and temperature inside the cabinet and an reads them digitally and graphically by TFT Computer. 
With the computer, you can print the graphics that the software will record, and store these graphics in memory. 
The air in the device is homogenized by the fan system which operates automatically. 

Dimension : 2100 * 1350 * 2200 mm
Power Supply : 220 V / 50-60 Hz / 1 Phase